From: Pali Rohár <pali@xxxxxxxxxx> commit 1f1050c5e1fefb34ac90a506b43e9da803b5f8f7 upstream. Older mvebu hardware provides PCIe Capability structure only in version 1. New mvebu and aardvark hardware provides it in version 2. So do not force version to 2 in pci_bridge_emul_init() and rather allow drivers to set correct version. Drivers need to set version in pcie_conf.cap field without overwriting PCI_CAP_LIST_ID register. Both drivers (mvebu and aardvark) do not provide slot support yet, so do not set PCI_EXP_FLAGS_SLOT flag. Link: https://lore.kernel.org/r/20211124155944.1290-6-pali@xxxxxxxxxx Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/pci/controller/pci-aardvark.c | 4 +++- drivers/pci/controller/pci-mvebu.c | 8 ++++++++ drivers/pci/pci-bridge-emul.c | 5 +---- 3 files changed, 12 insertions(+), 5 deletions(-) --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -872,7 +872,6 @@ advk_pci_bridge_emul_pcie_conf_read(stru return PCI_BRIDGE_EMUL_HANDLED; } - case PCI_CAP_LIST_ID: case PCI_EXP_DEVCAP: case PCI_EXP_DEVCTL: *value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg); @@ -953,6 +952,9 @@ static int advk_sw_pci_bridge_init(struc /* Support interrupt A for MSI feature */ bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE; + /* Aardvark HW provides PCIe Capability structure in version 2 */ + bridge->pcie_conf.cap = cpu_to_le16(2); + /* Indicates supports for Completion Retry Status */ bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS); --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -573,6 +573,8 @@ static struct pci_bridge_emul_ops mvebu_ static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port) { struct pci_bridge_emul *bridge = &port->bridge; + u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP); + u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS); bridge->conf.vendor = PCI_VENDOR_ID_MARVELL; bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16; @@ -585,6 +587,12 @@ static void mvebu_pci_bridge_emul_init(s bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32; } + /* + * Older mvebu hardware provides PCIe Capability structure only in + * version 1. New hardware provides it in version 2. + */ + bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver); + bridge->has_pcie = true; bridge->data = port; bridge->ops = &mvebu_pci_bridge_emul_ops; --- a/drivers/pci/pci-bridge-emul.c +++ b/drivers/pci/pci-bridge-emul.c @@ -297,10 +297,7 @@ int pci_bridge_emul_init(struct pci_brid if (bridge->has_pcie) { bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START; bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP; - /* Set PCIe v2, root port, slot support */ - bridge->pcie_conf.cap = - cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4 | 2 | - PCI_EXP_FLAGS_SLOT); + bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4); bridge->pcie_cap_regs_behavior = kmemdup(pcie_cap_regs_behavior, sizeof(pcie_cap_regs_behavior),
