From: Felix Fietkau <nbd@xxxxxxxx> [ Upstream commit 70fb028707c8871ef9e56b3ffa3d895e14956cc4 ] Typically all AP interfaces on a PHY will share the same WMM settings, while sta/mesh interfaces will usually inherit the settings from a remote device. In order minimize the likelihood of conflicting WMM settings, make all AP interfaces share one slot, and all non-AP interfaces another one. This also fixes running multiple AP interfaces on MT7613, which only has 3 WMM slots. Signed-off-by: Felix Fietkau <nbd@xxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt7615/main.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index 890d9b07e1563..b308d5ab5f9a6 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -211,11 +211,9 @@ static int mt7615_add_interface(struct ieee80211_hw *hw, mvif->mt76.omac_idx = idx; mvif->mt76.band_idx = ext_phy; - if (mt7615_ext_phy(dev)) - mvif->mt76.wmm_idx = ext_phy * (MT7615_MAX_WMM_SETS / 2) + - mvif->mt76.idx % (MT7615_MAX_WMM_SETS / 2); - else - mvif->mt76.wmm_idx = mvif->mt76.idx % MT7615_MAX_WMM_SETS; + mvif->mt76.wmm_idx = vif->type != NL80211_IFTYPE_AP; + if (ext_phy) + mvif->mt76.wmm_idx += 2; dev->mt76.vif_mask |= BIT(mvif->mt76.idx); dev->omac_mask |= BIT_ULL(mvif->mt76.omac_idx); -- 2.34.1
