From: Bin Meng <bin.meng@xxxxxxxxxxxxx> commit 298d03c2d7f1b5daacb6d4f4053fd3d677d67087 upstream. Per HiFive Unmatched schematics, the card detect signal of the micro SD card is connected to gpio pin #15, which should be reflected in the DT via the <gpios> property, as described in Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt. [1] https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf Signed-off-by: Bin Meng <bin.meng@xxxxxxxxxxxxx> Fixes: d573b5558abb ("riscv: dts: add initial board data for the SiFive HiFive Unmatched") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 2 ++ 1 file changed, 2 insertions(+) --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -2,6 +2,7 @@ /* Copyright (c) 2020 SiFive, Inc */ #include "fu740-c000.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ @@ -228,6 +229,7 @@ spi-max-frequency = <20000000>; voltage-ranges = <3300 3300>; disable-wp; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; };
