Re: [PATCH 2/3] usb: mtu3: add memory barrier before set GPD's HWO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 09, 2021 at 11:14:23AM +0800, Chunfeng Yun wrote:
> There is a seldom issue that the controller access invalid address
> and trigger devapc or emimpu violation. That is due to memory access
> is out of order and cause gpd data is not correct.
> Make sure GPD is fully written before giving it to HW by setting its
> HWO.
> 
> Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
> Cc: stable@xxxxxxxxxxxxxxx
> Reported-by: Eddie Hung <eddie.hung@xxxxxxxxxxxx>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> ---
>  drivers/usb/mtu3/mtu3_qmu.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c
> index 3f414f91b589..34bb5ac67efe 100644
> --- a/drivers/usb/mtu3/mtu3_qmu.c
> +++ b/drivers/usb/mtu3/mtu3_qmu.c
> @@ -273,6 +273,8 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
>  			gpd->dw3_info |= cpu_to_le32(GPD_EXT_FLAG_ZLP);
>  	}
>  
> +	/* make sure GPD is fully written before giving it to HW */
> +	mb();

So this means you are using mmio for this structure?  If so, shouldn't
you be using normal io memory read/write calls as well and not just
"raw" pointers like this:

>  	gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO);

Are you sure this is ok?

Sprinkling around mb() calls is almost never the correct solution.

If you need to ensure that a write succeeds, shouldn't you do a read
from it afterward?  Many busses require this, doesn't yours?



>  
>  	mreq->gpd = gpd;
> @@ -306,6 +308,8 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
>  	gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
>  	ext_addr |= GPD_EXT_NGP(mtu, upper_32_bits(enq_dma));
>  	gpd->dw3_info = cpu_to_le32(ext_addr);
> +	/* make sure GPD is fully written before giving it to HW */
> +	mb();

Again, mb(); does not ensure that memory-mapped i/o actually hits the
HW.  Or if it does on your platform, how?

mb() is a compiler barrier, not a memory write to a bus barrier.  Please
read Documentation/memory-barriers.txt for more details.

thanks,

greg k-h



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux