From: Yangyang Li <liyangyang20@xxxxxxxxxx>
commit b0969f83890bf8b47f5c8bd42539599b2b52fdeb upstream.
When hns_roce_v2_destroy_qp() is called, the brief calling process of the
driver is as follows:
......
hns_roce_v2_destroy_qp
hns_roce_v2_qp_modify
hns_roce_cmd_mbox
hns_roce_qp_destroy
If hns_roce_cmd_mbox() detects that the hardware is being reset during the
execution of the hns_roce_cmd_mbox(), the driver will not be able to get
the return value from the hardware (the firmware cannot respond to the
driver's mailbox during the hardware reset phase).
The driver needs to wait for the hardware reset to complete before
continuing to execute hns_roce_qp_destroy(), otherwise it may happen that
the driver releases the resources but the hardware is still accessing. In
order to fix this problem, HNS RoCE needs to add a piece of code to wait
for the hardware reset to complete.
The original interface get_hw_reset_stat() is the instantaneous state of
the hardware reset, which cannot accurately reflect whether the hardware
reset is completed, so it needs to be replaced with the ae_dev_reset_cnt
interface.
The sign that the hardware reset is complete is that the return value of
the ae_dev_reset_cnt interface is greater than the original value
reset_cnt recorded by the driver.
Fixes: 6a04aed6afae ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Link: https://lore.kernel.org/r/20211123142402.26936-1-liangwenpeng@xxxxxxxxxx
Signed-off-by: Yangyang Li <liyangyang20@xxxxxxxxxx>
Signed-off-by: Wenpeng Liang <liangwenpeng@xxxxxxxxxx>
Signed-off-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -33,6 +33,7 @@
#include <linux/acpi.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <net/addrconf.h>
@@ -964,9 +965,14 @@ static int hns_roce_v2_cmd_hw_resetting(
unsigned long instance_stage,
unsigned long reset_stage)
{
+#define HW_RESET_TIMEOUT_US 1000000
+#define HW_RESET_SLEEP_US 1000
+
struct hns_roce_v2_priv *priv = hr_dev->priv;
struct hnae3_handle *handle = priv->handle;
const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+ unsigned long val;
+ int ret;
/* When hardware reset is detected, we should stop sending mailbox&cmq&
* doorbell to hardware. If now in .init_instance() function, we should
@@ -978,7 +984,11 @@ static int hns_roce_v2_cmd_hw_resetting(
* again.
*/
hr_dev->dis_db = true;
- if (!ops->get_hw_reset_stat(handle))
+
+ ret = read_poll_timeout(ops->ae_dev_reset_cnt, val,
+ val > hr_dev->reset_cnt, HW_RESET_SLEEP_US,
+ HW_RESET_TIMEOUT_US, false, handle);
+ if (!ret)
hr_dev->is_reset = true;
if (!hr_dev->is_reset || reset_stage == HNS_ROCE_STATE_RST_INIT ||
