From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> commit 811ae81320da53a5670c36970cefacca8519f90e upstream. When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume routine also resets the controller. This is bad for USB drivers without reset_resume callback, because there's no subsequent call of usb_dev_complete() -> usb_resume_complete() to force rebinding the driver to the device. For instance, btusb device stops working after xHCI controller is runtime resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME. So always take XHCI_RESET_ON_RESUME into account to solve the issue. Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/xhci.c | 4 ---- 1 file changed, 4 deletions(-) --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3627,7 +3627,6 @@ static void xhci_free_dev(struct usb_hcd struct xhci_slot_ctx *slot_ctx; int i, ret; -#ifndef CONFIG_USB_DEFAULT_PERSIST /* * We called pm_runtime_get_noresume when the device was attached. * Decrement the counter here to allow controller to runtime suspend @@ -3635,7 +3634,6 @@ static void xhci_free_dev(struct usb_hcd */ if (xhci->quirks & XHCI_RESET_ON_RESUME) pm_runtime_put_noidle(hcd->self.controller); -#endif ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); /* If the host is halted due to driver unload, we still need to free the @@ -3790,14 +3788,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, udev->slot_id = slot_id; -#ifndef CONFIG_USB_DEFAULT_PERSIST /* * If resetting upon resume, we can't put the controller into runtime * suspend if there is a device attached. */ if (xhci->quirks & XHCI_RESET_ON_RESUME) pm_runtime_get_noresume(hcd->self.controller); -#endif /* Is this a LS or FS device under a HS hub? */ /* Hub or peripherial? */