3.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
commit 51e2fc0a251ba64c68207e4c6f6ac33c891b2465 upstream.
S2MPA01 supports enabling/disabling ramp delay only for buck[1234].
Other bucks have ramp delay enabled always.
However the bit shift for enabling buck4 ramp delay in register is equal
to 0. When ramp delay was set for the bucks unsupporting enable/disable
(buck[56789] and buck10), the ramp delay for buck4 was also enabled.
Fixes: f7b1a8dc1c1c ("regulator: s2mpa01: Don't check enable_shift before setting enable ramp rate")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Reviewed-by: Axel Lin <axel.lin@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/regulator/s2mpa01.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -191,11 +191,15 @@ static int s2mpa01_set_ramp_delay(struct
if (!ramp_enable)
goto ramp_disable;
- ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
- 1 << enable_shift, 1 << enable_shift);
- if (ret) {
- dev_err(&rdev->dev, "failed to enable ramp rate\n");
- return ret;
+ /* Ramp delay can be enabled/disabled only for buck[1234] */
+ if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
+ rdev_get_id(rdev) <= S2MPA01_BUCK4) {
+ ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+ 1 << enable_shift, 1 << enable_shift);
+ if (ret) {
+ dev_err(&rdev->dev, "failed to enable ramp rate\n");
+ return ret;
+ }
}
ramp_val = get_ramp_delay(ramp_delay);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html