FAILED: patch "[PATCH] i2c: stm32f7: flush TX FIFO upon transfer errors" failed to apply to 4.14-stable tree

[<gregkh@xxxxxxxxxxxxxxxxxxx>]

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 0c21d02ca469574d2082379db52d1a27b99eed0c Mon Sep 17 00:00:00 2001
From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
Date: Mon, 20 Sep 2021 17:21:29 +0200
Subject: [PATCH] i2c: stm32f7: flush TX FIFO upon transfer errors

While handling an error during transfer (ex: NACK), it could
happen that the driver has already written data into TXDR
before the transfer get stopped.
This commit add TXDR Flush after end of transfer in case of error to
avoid sending a wrong data on any other slave upon next transfer.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index b9b19a2a2ffa..ed977b6f7ab6 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1696,6 +1696,16 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
 	time_left = wait_for_completion_timeout(&i2c_dev->complete,
 						i2c_dev->adap.timeout);
 	ret = f7_msg->result;
+	if (ret) {
+		/*
+		 * It is possible that some unsent data have already been
+		 * written into TXDR. To avoid sending old data in a
+		 * further transfer, flush TXDR in case of any error
+		 */
+		writel_relaxed(STM32F7_I2C_ISR_TXE,
+			       i2c_dev->base + STM32F7_I2C_ISR);
+		goto pm_free;
+	}
 
 	if (!time_left) {
 		dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
@@ -1744,8 +1754,16 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	timeout = wait_for_completion_timeout(&i2c_dev->complete,
 					      i2c_dev->adap.timeout);
 	ret = f7_msg->result;
-	if (ret)
+	if (ret) {
+		/*
+		 * It is possible that some unsent data have already been
+		 * written into TXDR. To avoid sending old data in a
+		 * further transfer, flush TXDR in case of any error
+		 */
+		writel_relaxed(STM32F7_I2C_ISR_TXE,
+			       i2c_dev->base + STM32F7_I2C_ISR);
 		goto pm_free;
+	}
 
 	if (!timeout) {
 		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);