[git:media_tree/master] media: mceusb: fix control-message timeouts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is an automatic generated email to let you know that the following patch were queued:

Subject: media: mceusb: fix control-message timeouts
Author:  Johan Hovold <johan@xxxxxxxxxx>
Date:    Mon Oct 25 13:16:34 2021 +0100

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@xxxxxxxxxxxxxxx      # 2.6.36
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>

 drivers/media/rc/mceusb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

---

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index d09bee82c04c..2dc810f5a73f 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1430,7 +1430,7 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	 */
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
-			      data, USB_CTRL_MSG_SZ, HZ * 3);
+			      data, USB_CTRL_MSG_SZ, 3000);
 	dev_dbg(dev, "set address - ret = %d", ret);
 	dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
 						data[0], data[1]);
@@ -1438,20 +1438,20 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	/* set feature: bit rate 38400 bps */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
-			      0xc04e, 0x0000, NULL, 0, HZ * 3);
+			      0xc04e, 0x0000, NULL, 0, 3000);
 
 	dev_dbg(dev, "set feature - ret = %d", ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
-			      0x0808, 0x0000, NULL, 0, HZ * 3);
+			      0x0808, 0x0000, NULL, 0, 3000);
 	dev_dbg(dev, "set char length - retB = %d", ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
-			      0x0000, 0x0100, NULL, 0, HZ * 3);
+			      0x0000, 0x0100, NULL, 0, 3000);
 	dev_dbg(dev, "set handshake  - retC = %d", ret);
 
 	/* device resume */



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux