[PATCH 5.15 017/179] usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ondrej Jirman <megous@xxxxxxxxxx>

commit 362468830dd5bea8bf6ad5203b2ea61f8a4e8288 upstream.

The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc
wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate
bit in the mask register. In fact, interrupts are enabled when the mask
is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects
BC_LVL interrupt to be enabled.

This causes inability of the driver to recognize cable unplug events
in host mode (unplug is recognized only via a COMP_CHNG interrupt).

In device mode this bug was masked by simultaneous triggering of the VBUS
change interrupt, because of loss of VBUS when the port peer is providing
power.

Fixes: 48242e30532b ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/typec/tcpm/fusb302.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *
 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 					     FUSB_REG_MASK_BC_LVL |
 					     FUSB_REG_MASK_COMP_CHNG,
-					     FUSB_REG_MASK_COMP_CHNG);
+					     FUSB_REG_MASK_BC_LVL);
 		if (ret < 0) {
 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 				    ret);
 			goto done;
 		}
 		chip->intr_comp_chng = true;
+		chip->intr_bc_lvl = false;
 		break;
 	case TYPEC_CC_RD:
 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 					     FUSB_REG_MASK_BC_LVL |
 					     FUSB_REG_MASK_COMP_CHNG,
-					     FUSB_REG_MASK_BC_LVL);
+					     FUSB_REG_MASK_COMP_CHNG);
 		if (ret < 0) {
 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 				    ret);
 			goto done;
 		}
 		chip->intr_bc_lvl = true;
+		chip->intr_comp_chng = false;
 		break;
 	default:
 		break;





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux