From: Pali Rohár <pali@xxxxxxxxxx> commit 223dec14a05337a4155f1deed46d2becce4d00fd upstream. Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") fixed handling of CRS response and when CRSSVE flag was not enabled it marked CRS response as failed transaction (due to simplicity). But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count for PIO config response and so we can with a small change implement re-issuing of config requests as described in PCIe base specification. This change implements re-issuing of config requests when response is CRS. Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the transaction is marked as failed and an all-ones value is returned as before. We do this by returning appropriate error codes from function advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then reissues transaction. Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@xxxxxxxxxx Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Reviewed-by: Marek Behún <kabel@xxxxxxxxxx> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++------------- 1 file changed, 44 insertions(+), 25 deletions(-) --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -666,6 +666,7 @@ static int advk_pcie_check_pio_status(st u32 reg; unsigned int status; char *strcomp_status, *str_posted; + int ret; reg = advk_readl(pcie, PIO_STAT); status = (reg & PIO_COMPLETION_STATUS_MASK) >> @@ -690,6 +691,7 @@ static int advk_pcie_check_pio_status(st case PIO_COMPLETION_STATUS_OK: if (reg & PIO_ERR_STATUS) { strcomp_status = "COMP_ERR"; + ret = -EFAULT; break; } /* Get the read result */ @@ -697,9 +699,11 @@ static int advk_pcie_check_pio_status(st *val = advk_readl(pcie, PIO_RD_DATA); /* No error */ strcomp_status = NULL; + ret = 0; break; case PIO_COMPLETION_STATUS_UR: strcomp_status = "UR"; + ret = -EOPNOTSUPP; break; case PIO_COMPLETION_STATUS_CRS: if (allow_crs && val) { @@ -717,6 +721,7 @@ static int advk_pcie_check_pio_status(st */ *val = CFG_RD_CRS_VAL; strcomp_status = NULL; + ret = 0; break; } /* PCIe r4.0, sec 2.3.2, says: @@ -732,21 +737,24 @@ static int advk_pcie_check_pio_status(st * Request and taking appropriate action, e.g., complete the * Request to the host as a failed transaction. * - * To simplify implementation do not re-issue the Configuration - * Request and complete the Request as a failed transaction. + * So return -EAGAIN and caller (pci-aardvark.c driver) will + * re-issue request again up to the PIO_RETRY_CNT retries. */ strcomp_status = "CRS"; + ret = -EAGAIN; break; case PIO_COMPLETION_STATUS_CA: strcomp_status = "CA"; + ret = -ECANCELED; break; default: strcomp_status = "Unknown"; + ret = -EINVAL; break; } if (!strcomp_status) - return 0; + return ret; if (reg & PIO_NON_POSTED_REQ) str_posted = "Non-posted"; @@ -756,7 +764,7 @@ static int advk_pcie_check_pio_status(st dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n", str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS)); - return -EFAULT; + return ret; } static int advk_pcie_wait_pio(struct advk_pcie *pcie) @@ -764,13 +772,13 @@ static int advk_pcie_wait_pio(struct adv struct device *dev = &pcie->pdev->dev; int i; - for (i = 0; i < PIO_RETRY_CNT; i++) { + for (i = 1; i <= PIO_RETRY_CNT; i++) { u32 start, isr; start = advk_readl(pcie, PIO_START); isr = advk_readl(pcie, PIO_ISR); if (!start && isr) - return 0; + return i; udelay(PIO_RETRY_DELAY); } @@ -974,6 +982,7 @@ static int advk_pcie_rd_conf(struct pci_ int where, int size, u32 *val) { struct advk_pcie *pcie = bus->sysdata; + int retry_count; bool allow_crs; u32 reg; int ret; @@ -1016,16 +1025,22 @@ static int advk_pcie_rd_conf(struct pci_ /* Program the data strobe */ advk_writel(pcie, 0xf, PIO_WR_DATA_STRB); - /* Clear PIO DONE ISR and start the transfer */ - advk_writel(pcie, 1, PIO_ISR); - advk_writel(pcie, 1, PIO_START); - - ret = advk_pcie_wait_pio(pcie); - if (ret < 0) - goto try_crs; + retry_count = 0; + do { + /* Clear PIO DONE ISR and start the transfer */ + advk_writel(pcie, 1, PIO_ISR); + advk_writel(pcie, 1, PIO_START); + + ret = advk_pcie_wait_pio(pcie); + if (ret < 0) + goto try_crs; + + retry_count += ret; + + /* Check PIO status and get the read result */ + ret = advk_pcie_check_pio_status(pcie, allow_crs, val); + } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT); - /* Check PIO status and get the read result */ - ret = advk_pcie_check_pio_status(pcie, allow_crs, val); if (ret < 0) goto fail; @@ -1057,6 +1072,7 @@ static int advk_pcie_wr_conf(struct pci_ struct advk_pcie *pcie = bus->sysdata; u32 reg; u32 data_strobe = 0x0; + int retry_count; int offset; int ret; @@ -1098,19 +1114,22 @@ static int advk_pcie_wr_conf(struct pci_ /* Program the data strobe */ advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB); - /* Clear PIO DONE ISR and start the transfer */ - advk_writel(pcie, 1, PIO_ISR); - advk_writel(pcie, 1, PIO_START); + retry_count = 0; + do { + /* Clear PIO DONE ISR and start the transfer */ + advk_writel(pcie, 1, PIO_ISR); + advk_writel(pcie, 1, PIO_START); + + ret = advk_pcie_wait_pio(pcie); + if (ret < 0) + return PCIBIOS_SET_FAILED; - ret = advk_pcie_wait_pio(pcie); - if (ret < 0) - return PCIBIOS_SET_FAILED; + retry_count += ret; - ret = advk_pcie_check_pio_status(pcie, false, NULL); - if (ret < 0) - return PCIBIOS_SET_FAILED; + ret = advk_pcie_check_pio_status(pcie, false, NULL); + } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT); - return PCIBIOS_SUCCESSFUL; + return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL; } static struct pci_ops advk_pcie_ops = {