From: Pali Rohár <pali@xxxxxxxxxx> commit 454c53271fc11f3aa5e44e41fd99ca181bd32c62 upstream. PCIe config space can be initialized also before pci_bridge_emul_init() call, so move rootcap initialization after PCI config space initialization. This simplifies the function a little since it removes one if (ret < 0) check. Link: https://lore.kernel.org/r/20211005180952.6812-11-kabel@xxxxxxxxxx Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Reviewed-by: Marek Behún <kabel@xxxxxxxxxx> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/pci/controller/pci-aardvark.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -992,7 +992,6 @@ static struct pci_bridge_emul_ops advk_p static int advk_sw_pci_bridge_init(struct advk_pcie *pcie) { struct pci_bridge_emul *bridge = &pcie->bridge; - int ret; bridge->conf.vendor = cpu_to_le16(advk_readl(pcie, PCIE_CORE_DEV_ID_REG) & 0xffff); @@ -1012,19 +1011,14 @@ static int advk_sw_pci_bridge_init(struc /* Support interrupt A for MSI feature */ bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE; + /* Indicates supports for Completion Retry Status */ + bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS); + bridge->has_pcie = true; bridge->data = pcie; bridge->ops = &advk_pci_bridge_emul_ops; - /* PCIe config space can be initialized after pci_bridge_emul_init() */ - ret = pci_bridge_emul_init(bridge, 0); - if (ret < 0) - return ret; - - /* Indicates supports for Completion Retry Status */ - bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS); - - return 0; + return pci_bridge_emul_init(bridge, 0); } static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
