On Thu, Nov 25, 2021 at 10:44:32AM +0800, Dylan Hung wrote:
> The issue happened randomly in runtime. The message "Link is Down" is
> popped but soon it recovered to "Link is Up".
>
> The "Link is Down" results from the incorrect read data for reading the
> PHY register via MDIO bus. The correct sequence for reading the data
> shall be:
> 1. fire the command
> 2. wait for command done (this step was missing)
> 3. wait for data idle
> 4. read data from data register
>
> Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
> Signed-off-by: Dylan Hung <dylan_hung@xxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
