From: Remi Pommarel <repk@xxxxxxxxxxxx>
commit f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 upstream.
When configuring pcie reset pin from gpio (e.g. initially set by
u-boot) to pcie function this pin goes low for a brief moment
asserting the PERST# signal. Thus connected device enters fundamental
reset process and link configuration can only begin after a minimal
100ms delay (see [1]).
Because the pin configuration comes from the "default" pinctrl it is
implicitly configured before the probe callback is called:
driver_probe_device()
really_probe()
...
pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
function and PERST# is asserted */
...
drv->probe()
[1] "PCI Express Base Specification", REV. 4.0
PCI Express, February 19 2014, 6.6.1 Conventional Reset
Signed-off-by: Remi Pommarel <repk@xxxxxxxxxxxx>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Acked-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
---
drivers/pci/controller/pci-aardvark.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 3625d73e016a..3449d1444805 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -318,6 +318,14 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
+ /*
+ * PERST# signal could have been asserted by pinctrl subsystem before
+ * probe() callback has been called, making the endpoint going into
+ * fundamental reset. As required by PCI Express spec a delay for at
+ * least 100ms after such a reset before link training is needed.
+ */
+ msleep(PCI_PM_D3COLD_WAIT);
+
/* Start link training */
reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
reg |= PCIE_CORE_LINK_TRAINING;
--
2.32.0
