[PATCH 4.14 04/24] PCI: aardvark: Train link immediately after enabling training

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pali Rohár <pali@xxxxxxxxxx>

commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 upstream.

Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
training and starting link training causes detection issues with some
buggy cards (such as Compex WLE900VX).

Move the code which enables link training immediately before the one
which starts link traning.

This fixes detection issues of Compex WLE900VX card on Turris MOX after
cold boot.

Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@xxxxxxxxxx
Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
Tested-by: Tomasz Maciej Nowak <tmn505@xxxxxxxxx>
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Acked-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
---
 drivers/pci/host/pci-aardvark.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index 7ee5a91e5f7f..8373f8cc4c52 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -324,11 +324,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg |= LANE_COUNT_1;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
-	/* Enable link training */
-	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-	reg |= LINK_TRAINING_EN;
-	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
 	/* Enable MSI */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
 	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
@@ -370,7 +365,15 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	 */
 	msleep(PCI_PM_D3COLD_WAIT);
 
-	/* Start link training */
+	/* Enable link training */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg |= LINK_TRAINING_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/*
+	 * Start link training immediately after enabling it.
+	 * This solves problems for some buggy cards.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
 	reg |= PCIE_CORE_LINK_TRAINING;
 	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-- 
2.32.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux