From: Johan Hovold <johan@xxxxxxxxxx>
commit 9b371c6cc37f954360989eec41c2ddc5a6b83917 upstream.
USB control and bulk message timeouts are specified in milliseconds and
should specifically not vary with CONFIG_HZ.
Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Cc: stable@xxxxxxxxxxxxxxx # 2.6.39
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20211025121142.6531-2-johan@xxxxxxxxxx
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/usb/6fire/comm.c | 2 +-
sound/usb/6fire/firmware.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/sound/usb/6fire/comm.c
+++ b/sound/usb/6fire/comm.c
@@ -95,7 +95,7 @@ static int usb6fire_comm_send_buffer(u8
int actual_len;
ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP),
- buffer, buffer[1] + 2, &actual_len, HZ);
+ buffer, buffer[1] + 2, &actual_len, 1000);
if (ret < 0)
return ret;
else if (actual_len != buffer[1] + 2)
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -162,7 +162,7 @@ static int usb6fire_fw_ezusb_write(struc
ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, 0, data, len, HZ);
+ value, 0, data, len, 1000);
if (ret < 0)
return ret;
else if (ret != len)
@@ -175,7 +175,7 @@ static int usb6fire_fw_ezusb_read(struct
{
int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value,
- 0, data, len, HZ);
+ 0, data, len, 1000);
if (ret < 0)
return ret;
else if (ret != len)
@@ -190,7 +190,7 @@ static int usb6fire_fw_fpga_write(struct
int ret;
ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len,
- &actual_len, HZ);
+ &actual_len, 1000);
if (ret < 0)
return ret;
else if (actual_len != len)
