commit 041c61488236a5a84789083e3d9f0a51139b6edf upstream,
with filename updated in backport to v5.4 and older.
Everything except the first 32 bits was lost when the pause flags were
added. This makes the 50000baseCR2 mode flag (bit 34) not appear.
I have tested this with a 10G card (SFN5122F-R7) by modifying it to
return a non-legacy link mode (10000baseCR).
Signed-off-by: Erik Ekman <erik@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
---
drivers/net/ethernet/sfc/ethtool.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index 86b965875540..d53e945dd08f 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -128,20 +128,14 @@ efx_ethtool_get_link_ksettings(struct net_device *net_dev,
{
struct efx_nic *efx = netdev_priv(net_dev);
struct efx_link_state *link_state = &efx->link_state;
- u32 supported;
mutex_lock(&efx->mac_lock);
efx->phy_op->get_link_ksettings(efx, cmd);
mutex_unlock(&efx->mac_lock);
/* Both MACs support pause frames (bidirectional and respond-only) */
- ethtool_convert_link_mode_to_legacy_u32(&supported,
- cmd->link_modes.supported);
-
- supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-
- ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
- supported);
+ ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
+ ethtool_link_ksettings_add_link_mode(cmd, supported, Asym_Pause);
if (LOOPBACK_INTERNAL(efx)) {
cmd->base.speed = link_state->speed;
--
2.33.1
