From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
@stable: This patch fixes a bug because this (superfluous) call to
clk_set_rate() misses the required clock gating. The resulting
clock glitches can prevent the system from booting.
Changelog:
-----------
RFC --> v1
- Cc: stable@xxxxxxxxxxxxxxx
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 4d08e4ab5c1b..a1f7000f033e 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1034,15 +1034,6 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
r->clock[i] = clk;
}
- if (GPMI_IS_MX6(this))
- /*
- * Set the default value for the gpmi clock.
- *
- * If you want to use the ONFI nand which is in the
- * Synchronous Mode, you should change the clock as you need.
- */
- clk_set_rate(r->clock[0], 22000000);
-
return 0;
err_clock:
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
