From: Johan Hovold <johan@xxxxxxxxxx>
commit 8c8171929116cc23f74743d99251eedadf62341a upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@xxxxxxxxxxxxxxx # 3.0
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@xxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/vub300.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -579,7 +579,7 @@ static void check_vub300_port_status(str
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
- sizeof(vub300->system_port_status), HZ);
+ sizeof(vub300->system_port_status), 1000);
if (sizeof(vub300->system_port_status) == retval)
new_system_port_status(vub300);
}
@@ -1244,7 +1244,7 @@ static void __download_offload_pseudocod
SET_INTERRUPT_PSEUDOCODE,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, 0x0000, 0x0000,
- xfer_buffer, xfer_length, HZ);
+ xfer_buffer, xfer_length, 1000);
kfree(xfer_buffer);
if (retval < 0)
goto copy_error_message;
@@ -1287,7 +1287,7 @@ static void __download_offload_pseudocod
SET_TRANSFER_PSEUDOCODE,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, 0x0000, 0x0000,
- xfer_buffer, xfer_length, HZ);
+ xfer_buffer, xfer_length, 1000);
kfree(xfer_buffer);
if (retval < 0)
goto copy_error_message;
@@ -1994,7 +1994,7 @@ static void __set_clock_speed(struct vub
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_CLOCK_SPEED,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x00, 0x00, buf, buf_array_size, HZ);
+ 0x00, 0x00, buf, buf_array_size, 1000);
if (retval != 8) {
dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
" %dkHz failed with retval=%d\n", kHzClock, retval);
@@ -2016,14 +2016,14 @@ static void vub300_mmc_set_ios(struct mm
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_SD_POWER,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, 0x0000, NULL, 0, HZ);
+ 0x0000, 0x0000, NULL, 0, 1000);
/* must wait for the VUB300 u-proc to boot up */
msleep(600);
} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_SD_POWER,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0001, 0x0000, NULL, 0, HZ);
+ 0x0001, 0x0000, NULL, 0, 1000);
msleep(600);
vub300->card_powered = 1;
} else if (ios->power_mode == MMC_POWER_ON) {
@@ -2285,14 +2285,14 @@ static int vub300_probe(struct usb_inter
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
- sizeof(vub300->hc_info), HZ);
+ sizeof(vub300->hc_info), 1000);
if (retval < 0)
goto error5;
retval =
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+ firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
if (retval < 0)
goto error5;
dev_info(&vub300->udev->dev,
@@ -2307,7 +2307,7 @@ static int vub300_probe(struct usb_inter
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
- sizeof(vub300->system_port_status), HZ);
+ sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
goto error4;
} else if (sizeof(vub300->system_port_status) == retval) {
