Re: [Intel-gfx] [PATCH 2/6] drm/i915/dp: Ensure sink rate values are always valid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 19 Oct 2021, Imre Deak <imre.deak@xxxxxxxxx> wrote:
> On Tue, Oct 19, 2021 at 10:27:18AM +0300, Jani Nikula wrote:
>> On Mon, 18 Oct 2021, Imre Deak <imre.deak@xxxxxxxxx> wrote:
>> > Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
>> > DPCD capabilities are successfully read from the sink. During this time
>> > intel_dp->num_common_rates is 0 which can lead to a
>> >
>> > intel_dp->common_rates[-1]    (*)
>> >
>> > access, which is an undefined behaviour, in the following cases:
>> >
>> > - In intel_dp_sync_state(), if the encoder is enabled without a sink
>> >   connected to the encoder's connector (BIOS enabled a monitor, but the
>> >   user unplugged the monitor until the driver loaded).
>> > - In intel_dp_sync_state() if the encoder is enabled with a sink
>> >   connected, but for some reason the DPCD read has failed.
>> > - In intel_dp_compute_link_config() if modesetting a connector without
>> >   a sink connected on it.
>> > - In intel_dp_compute_link_config() if modesetting a connector with a
>> >   a sink connected on it, but before probing the connector first.
>> >
>> > To avoid the (*) access in all the above cases, make sure that the sink
>> > rate table - and hence the common rate table - is always valid, by
>> > setting a default minimum sink rate when registering the connector
>> > before anything could use it.
>> >
>> > I also considered setting all the DP link rates by default, so that
>> > modesetting with higher resolution modes also succeeds in the last two
>> > cases above. However in case a sink is not connected that would stop
>> > working after the first modeset, due to the LT fallback logic. So this
>> > would need more work, beyond the scope of this fix.
>> >
>> > As I mentioned in the previous patch, I don't think the issue this patch
>> > fixes is user visible, however it is an undefined behaviour by
>> > definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
>> 
>> I think the question here, and in the following patches, is whether this
>> papers over potential bugs elsewhere.
>> 
>> Would the original bug fixed by patch 1 have been detected if all the
>> safeguards here had been in place? Point being, we shouldn't be doing
>> any of these things before we've read the dpcd.
>
> Modesets are possible even without a connected sink or a read-out DPCD,
> so the link parameters need to be valid even without those.

Modeset on a disconnected DP? How?

BR,
Jani.


>
>> BR,
>> Jani.
>> 
>> 
>> >
>> > Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
>> > References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
>> > Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> > Cc: <stable@xxxxxxxxxxxxxxx>
>> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
>> > ---
>> >  drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++++++
>> >  1 file changed, 8 insertions(+)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> > index 23de500d56b52..153ae944a354b 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> > @@ -120,6 +120,12 @@ bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
>> >  	return crtc_state->port_clock >= 1000000;
>> >  }
>> >  
>> > +static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp)
>> > +{
>> > +	intel_dp->sink_rates[0] = 162000;
>> > +	intel_dp->num_sink_rates = 1;
>> > +}
>> > +
>> >  /* update sink rates from dpcd */
>> >  static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
>> >  {
>> > @@ -5003,6 +5009,8 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
>> >  	}
>> >  
>> >  	intel_dp_set_source_rates(intel_dp);
>> > +	intel_dp_set_default_sink_rates(intel_dp);
>> > +	intel_dp_set_common_rates(intel_dp);
>> >  
>> >  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>> >  		intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp);
>> 
>> -- 
>> Jani Nikula, Intel Open Source Graphics Center

-- 
Jani Nikula, Intel Open Source Graphics Center



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux