From: Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx> commit 13dbc954b3c9a9de0ad5b7279e8d3b708d31068b upstream. dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@xxxxxxxxxx Signed-off-by: Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -217,7 +217,8 @@ }; &pcie0 { - pci@1,0 { + pci@0,0 { + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges;