From: Jonathan Bell <jonathan@xxxxxxxxxxxxxxx> commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream. See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Jonathan Bell <jonathan@xxxxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/xhci.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3093,10 +3093,13 @@ static void xhci_endpoint_reset(struct u ep = &vdev->eps[ep_index]; /* Bail out if toggle is already being cleared by a endpoint reset */ + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE; + spin_unlock_irqrestore(&xhci->lock, flags); return; } + spin_unlock_irqrestore(&xhci->lock, flags); /* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */ if (usb_endpoint_xfer_control(&host_ep->desc) || usb_endpoint_xfer_isoc(&host_ep->desc)) @@ -3182,8 +3185,10 @@ static void xhci_endpoint_reset(struct u xhci_free_command(xhci, cfg_cmd); cleanup: xhci_free_command(xhci, stop_cmd); + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE) ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE; + spin_unlock_irqrestore(&xhci->lock, flags); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
