[PATCH RESEND 2/6] rtc-cmos: dont touch alarm registers during update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some Intel chipsets disconnect the time and date RTC registers when the
clock update is in progress: during this time reads may return bogus
values and writes fail silently. This includes the RTC alarm registers.
[1]

cmos_read_alarm() and cmos_set_alarm() did not take account for that,
which caused alarm time reads to sometimes return bogus values. This can
be shown with a test patch that I am attaching to this patch series.
Setting the alarm clock also probably did fail sometimes.

To make this patch suitable for inclusion in stable kernels, I'm using a
simple method for avoiding the RTC update cycle. This method is used in
mach_set_rtc_mmss() in arch/x86/kernel/rtc.c. A more elaborate algorithm
- as in mc146818_get_time() in drivers/rtc/rtc-mc146818-lib.c - would be
too complcated for stable. [2]

cmos_wait_for_uip_clear() has the rtc_lock taken while waiting for the
UIP bit to become clear. This should be harmless as during the UIP the RTC
cannot be read from anyway. mach_get_cmos_time() in arch/x86/kernel/rtc.c
does things the same way.

[1] 7th Generation Intel ® Processor Family I/O for U/Y Platforms [...]
Datasheet, Volume 1 of 2 (Intel's Document Number: 334658-006)
Page 208
https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-and-8th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.pdf
        "If a RAM read from the ten time and date bytes is attempted
        during an update cycle, the value read do not necessarily
        represent the true contents of those locations. Any RAM writes
        under the same conditions are ignored.'

[2] I'm going to submit a unification patch for a later kernel release -
prefer to see this in stable.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@xxxxx>
Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/rtc/rtc-cmos.c | 38 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 2cd0fe728ab2..643433d984ab 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -248,6 +248,31 @@ static int cmos_set_time(struct device *dev, struct rtc_time *t)
 	return mc146818_set_time(t);
 }
 
+/* Some Intel chipsets disconnect the alarm registers when the clock update is
+ * in progress - during this time reads return bogus values and writes may fail
+ * silently. See for example "7th Generation Intel® Processor Family I/O for
+ * U/Y Platforms [...] Datasheet", section 27.7.1
+ *
+ * Check the UIP bit to prevent this, waiting for max 10ms for it to become
+ * clear.
+ *
+ * This function has to be called with rtc_lock taken.
+ */
+static int cmos_wait_for_uip_clear(struct device *dev)
+{
+	int i;
+
+	for (i = 0; i < 100; i++) {
+		if ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) == 0)
+			return 0;
+		udelay(100);
+	}
+
+	dev_warn_ratelimited(dev, "UIP bit is stuck, cannot access RTC registers\n");
+
+	return 1;
+}
+
 static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
@@ -257,12 +282,17 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	if (!is_valid_irq(cmos->irq))
 		return -EIO;
 
+	spin_lock_irq(&rtc_lock);
+
+	if (cmos_wait_for_uip_clear(dev)) {
+		spin_unlock_irq(&rtc_lock);
+		return -EIO;
+	}
+
 	/* Basic alarms only support hour, minute, and seconds fields.
 	 * Some also support day and month, for alarms up to a year in
 	 * the future.
 	 */
-
-	spin_lock_irq(&rtc_lock);
 	t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
 	t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
 	t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
@@ -477,6 +507,10 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	}
 
 	spin_lock_irq(&rtc_lock);
+	if (cmos_wait_for_uip_clear(dev)) {
+		spin_unlock_irq(&rtc_lock);
+		return -EIO;
+	}
 
 	/* next rtc irq must not be from previous alarm setting */
 	cmos_irq_disable(cmos, RTC_AIE);
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux