From: Marek Vasut <marex@xxxxxxx>
[ Upstream commit c8c1efe14a4aadcfe93a158b1272e48298d2de15 ]
The panel already contains pinctrl-0 phandle, but it is missing
the default pinctrl-names property, so the pin configuration is
ignored. Fill in the missing pinctrl-names property, so the pin
configuration is applied.
Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/imx53-m53menlo.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index d3082b9774e4..48adcfd32cea 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -56,6 +56,7 @@
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
+ pinctrl-names = "default";
enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
port {
--
2.33.0
