Patch "sh_eth: use RNC mode for packet reception" has been added to the 3.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    sh_eth: use RNC mode for packet reception

to the 3.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     sh_eth-use-rnc-mode-for-packet-reception.patch
and it can be found in the queue-3.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From foo@baz Wed Jun 18 20:31:04 PDT 2014
From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
Date: Tue, 3 Jun 2014 12:21:13 +0100
Subject: sh_eth: use RNC mode for packet reception

From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>

[ Upstream commit 530aa2d0d9d55ab2775d47621ddf4b5b15bc1110 ]

The current behaviour of the sh_eth driver is not to use the RNC bit
for the receive ring. This means that every packet recieved is not only
generating an IRQ but it also stops the receive ring DMA as well until
the driver re-enables it after unloading the packet.

This means that a number of the following errors are generated due to
the receive packet FIFO overflowing due to nowhere to put packets:

	net eth0: Receive FIFO Overflow

Since feedback from Yoshihiro Shimoda shows that every supported LSI
for this driver should have the bit enabled it seems the best way is
to remove the RMCR default value from the per-system data and just
write it when initialising the RMCR value. This is discussed in
the message (http://www.spinics.net/lists/netdev/msg284912.html).

I have tested the RMCR_RNC configuration with NFS root filesystem and
the driver has not failed yet.  There are further test reports from
Sergei Shtylov and others for both the R8A7790 and R8A7791.

There is also feedback fron Cao Minh Hiep[1] which reports the
same issue in (http://comments.gmane.org/gmane.linux.network/316285)
showing this fixes issues with losing UDP datagrams under iperf.

Tested-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Acked-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/renesas/sh_eth.c |   11 ++---------
 drivers/net/ethernet/renesas/sh_eth.h |    2 --
 2 files changed, 2 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -546,7 +546,6 @@ static struct sh_eth_cpu_data sh7757_dat
 	.register_type	= SH_ETH_REG_FAST_SH4,
 
 	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
-	.rmcr_value	= RMCR_RNC,
 
 	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
 	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
@@ -624,7 +623,6 @@ static struct sh_eth_cpu_data sh7757_dat
 			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
 			  EESR_TDE | EESR_ECI,
 	.fdr_value	= 0x0000072f,
-	.rmcr_value	= RMCR_RNC,
 
 	.irq_flags	= IRQF_SHARED,
 	.apr		= 1,
@@ -752,7 +750,6 @@ static struct sh_eth_cpu_data r8a7740_da
 			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
 			  EESR_TDE | EESR_ECI,
 	.fdr_value	= 0x0000070f,
-	.rmcr_value	= RMCR_RNC,
 
 	.apr		= 1,
 	.mpr		= 1,
@@ -784,7 +781,6 @@ static struct sh_eth_cpu_data r7s72100_d
 			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
 			  EESR_TDE | EESR_ECI,
 	.fdr_value	= 0x0000070f,
-	.rmcr_value	= RMCR_RNC,
 
 	.no_psr		= 1,
 	.apr		= 1,
@@ -833,9 +829,6 @@ static void sh_eth_set_default_cpu_data(
 	if (!cd->fdr_value)
 		cd->fdr_value = DEFAULT_FDR_INIT;
 
-	if (!cd->rmcr_value)
-		cd->rmcr_value = DEFAULT_RMCR_VALUE;
-
 	if (!cd->tx_check)
 		cd->tx_check = DEFAULT_TX_CHECK;
 
@@ -1287,8 +1280,8 @@ static int sh_eth_dev_init(struct net_de
 	sh_eth_write(ndev, mdp->cd->fdr_value, FDR);
 	sh_eth_write(ndev, 0, TFTR);
 
-	/* Frame recv control */
-	sh_eth_write(ndev, mdp->cd->rmcr_value, RMCR);
+	/* Frame recv control (enable multiple-packets per rx irq) */
+	sh_eth_write(ndev, RMCR_RNC, RMCR);
 
 	sh_eth_write(ndev, DESC_I_RINT8 | DESC_I_RINT5 | DESC_I_TINT2, TRSCER);
 
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -319,7 +319,6 @@ enum TD_STS_BIT {
 enum RMCR_BIT {
 	RMCR_RNC = 0x00000001,
 };
-#define DEFAULT_RMCR_VALUE	0x00000000
 
 /* ECMR */
 enum FELIC_MODE_BIT {
@@ -466,7 +465,6 @@ struct sh_eth_cpu_data {
 	unsigned long fdr_value;
 	unsigned long fcftr_value;
 	unsigned long rpadir_value;
-	unsigned long rmcr_value;
 
 	/* interrupt checking mask */
 	unsigned long tx_check;


Patches currently in stable-queue which might be from ben.dooks@xxxxxxxxxxxxxxx are

queue-3.15/sh_eth-use-rnc-mode-for-packet-reception.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]