From: Pali Rohár <pali@xxxxxxxxxx>
It is incorrect to clear status bits of masked interrupts.
The aardvark driver clears all status interrupt bits if no unmasked
status bit is set. Masked bits should never be cleared.
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Reviewed-by: Marek Behún <kabel@xxxxxxxxxx>
Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/pci/controller/pci-aardvark.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index d5d6f92e5143..e4986806a189 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1295,11 +1295,8 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- if (!isr0_status && !isr1_status) {
- advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
- advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
+ if (!isr0_status && !isr1_status)
return;
- }
/* Process MSI interrupts */
if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
--
2.32.0
