Hi Frieder,
Am Do., 30. Sept. 2021 um 17:57 Uhr schrieb Frieder Schrempf <frieder@xxxxxxx>:
>
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>
> When the cpufreq driver is enabled, the buck2 regulator is kept powered on
> by the dependency between the CPU nodes with 'cpu-supply' set. Without the
> cpufreq driver the kernel will power off the regulator as it doesn't see
> any users. This is obviously not what we want, therefore keep the regulator
> powered on in any case.
>
> Reported-by: Heiko Thiery <heiko.thiery@xxxxxxxxx>
> Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Tested-by: Heiko Thiery <heiko.thiery@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
> index 213014f59b46..c3418d263eb4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
> @@ -105,6 +105,7 @@ reg_vdd_arm: BUCK2 {
> regulator-min-microvolt = <850000>;
> regulator-max-microvolt = <950000>;
> regulator-boot-on;
> + regulator-always-on;
> regulator-ramp-delay = <3125>;
> nxp,dvs-run-voltage = <950000>;
> nxp,dvs-standby-voltage = <850000>;
> --
> 2.33.0
>
