On Mon, Sep 20, 2021 at 08:22:44PM +0000, Patrick.Mclean@xxxxxxxx wrote: > In 5.10 stable kernels since 5.10.65 certain mlx5 cards are no longer usable (relevant dmesg logs and lspci output are pasted below). > > Bisecting the problem tracks the problem down to this commit: > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=fe6322774ca28669868a7e231e173e09f7422118 > > Here is how lscpi -nn identifies the cards: > 41:00.0 Ethernet controller [0200]: Mellanox Technologies MT27800 Family [ConnectX-5] [15b3:1017] > 41:00.1 Ethernet controller [0200]: Mellanox Technologies MT27800 Family [ConnectX-5] [15b3:1017] > > Here are the relevant dmesg logs: > [ 13.409473] mlx5_core 0000:41:00.0: firmware version: 16.31.1014 > [ 13.415944] mlx5_core 0000:41:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) > [ 13.707425] mlx5_core 0000:41:00.0: Rate limit: 127 rates are supported, range: 0Mbps to 24414Mbps > [ 13.718221] mlx5_core 0000:41:00.0: E-Switch: Total vports 2, per vport: max uc(128) max mc(2048) > [ 13.740607] mlx5_core 0000:41:00.0: Port module event: module 0, Cable plugged > [ 13.759857] mlx5_core 0000:41:00.0: mlx5_pcie_event:294:(pid 586): PCIe slot advertised sufficient power (75W). > [ 17.986973] mlx5_core 0000:41:00.0: E-Switch: cleanup > [ 18.686204] mlx5_core 0000:41:00.0: init_one:1371:(pid 803): mlx5_load_one failed with error code -22 > [ 18.701352] mlx5_core: probe of 0000:41:00.0 failed with error -22 > [ 18.727364] mlx5_core 0000:41:00.1: firmware version: 16.31.1014 > [ 18.743853] mlx5_core 0000:41:00.1: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) > [ 19.015349] mlx5_core 0000:41:00.1: Rate limit: 127 rates are supported, range: 0Mbps to 24414Mbps > [ 19.025157] mlx5_core 0000:41:00.1: E-Switch: Total vports 2, per vport: max uc(128) max mc(2048) > [ 19.053569] mlx5_core 0000:41:00.1: Port module event: module 1, Cable unplugged > [ 19.062093] mlx5_core 0000:41:00.1: mlx5_pcie_event:294:(pid 591): PCIe slot advertised sufficient power (75W). > [ 22.826932] mlx5_core 0000:41:00.1: E-Switch: cleanup > [ 23.544747] mlx5_core 0000:41:00.1: init_one:1371:(pid 803): mlx5_load_one failed with error code -22 > [ 23.555071] mlx5_core: probe of 0000:41:00.1 failed with error -22 > > Please let me know if I can provide any further information. If you revert that single change, do things work properly? Does newer kernels (5.14, 5.15-rc2) work properly for you as well? thanks, greg k-h
