From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> [ Upstream commit 36a0d47aee6a8cfd3c6cf4274732d8ef994a25b4 ] Previous pinctrl configuration was wrong. Fix it and clean up how multi-pin states are described. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20210728222542.54269-9-konrad.dybcio@xxxxxxxxxxxxxx [bjorn: Polished the commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 212 ++++++++++++++++++--------- 1 file changed, 139 insertions(+), 73 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 7da420cd21ba..ee7fcf4c158f 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -522,14 +522,18 @@ tcsr_mutex_regs: syscon@1f40000 { reg = <0x01f40000 0x20000>; }; - tlmm: pinctrl@3000000 { + tlmm: pinctrl@3100000 { compatible = "qcom,sdm630-pinctrl"; - reg = <0x03000000 0xc00000>; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; blsp1_uart1_default: blsp1-uart1-default { pins = "gpio0", "gpio1", "gpio2", "gpio3"; @@ -549,40 +553,48 @@ blsp1_uart2_default: blsp1-uart2-default { bias-disable; }; - blsp2_uart1_tx_active: blsp2-uart1-tx-active { - pins = "gpio16"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep { - pins = "gpio16"; - drive-strength = <2>; - bias-pull-up; - }; + blsp2_uart1_default: blsp2-uart1-active { + tx-rts { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; - blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active { - pins = "gpio17", "gpio18"; - drive-strength = <2>; - bias-disable; - }; + rx { + /* + * Avoid garbage data while BT module + * is powered off or not driving signal + */ + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; - blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep { - pins = "gpio17", "gpio18"; - drive-strength = <2>; - bias-no-pull; + cts { + /* Match the pull of the BT module */ + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; }; - blsp2_uart1_rfr_active: blsp2-uart1-rfr-active { - pins = "gpio19"; - drive-strength = <2>; - bias-disable; - }; + blsp2_uart1_sleep: blsp2-uart1-sleep { + tx { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; - blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep { - pins = "gpio19"; - drive-strength = <2>; - bias-no-pull; + rx-cts-rts { + pins = "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-no-pull; + }; }; i2c1_default: i2c1-default { @@ -681,50 +693,106 @@ i2c8_sleep: i2c8-sleep { bias-pull-up; }; - sdc1_clk_on: sdc1-clk-on { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; + sdc1_state_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; - sdc1_clk_off: sdc1-clk-off { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; - sdc1_cmd_on: sdc1-cmd-on { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; - sdc1_cmd_off: sdc1-cmd-off { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; - sdc1_data_on: sdc1-data-on { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <8>; - }; + sdc1_state_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; - sdc1_data_off: sdc1-data-off { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; - sdc1_rclk_on: sdc1-rclk-on { - pins = "sdc1_rclk"; - bias-pull-down; + sdc2_state_on: sdc2-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; }; - sdc1_rclk_off: sdc1-rclk-off { - pins = "sdc1_rclk"; - bias-pull-down; + sdc2_state_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; }; }; @@ -816,8 +884,8 @@ sdhc_1: sdhci@c0c4000 { clock-names = "core", "iface", "xo"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; bus-width = <8>; non-removable; @@ -962,10 +1030,8 @@ blsp2_uart1: serial@c1af000 { dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active - &blsp2_uart1_rfr_active>; - pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep - &blsp2_uart1_rfr_sleep>; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; status = "disabled"; }; -- 2.30.2
