From: Brandon Wyman <bjwyman@xxxxxxxxx> [ Upstream commit 76b72736f574ec38b3e94603ea5f74b1853f26b0 ] When doing a PMBus write for the LED control on the IBM Common Form Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7 be low and bit 6 be high in order to indicate that you are truly attempting to do a write. Signed-off-by: Brandon Wyman <bjwyman@xxxxxxxxx> Link: https://lore.kernel.org/r/20210806225131.1808759-1-bjwyman@xxxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/hwmon/pmbus/ibm-cffps.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c index 2fb7540ee952..79bc2032dcb2 100644 --- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -50,9 +50,9 @@ #define CFFPS_MFR_VAUX_FAULT BIT(6) #define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7) -#define CFFPS_LED_BLINK BIT(0) -#define CFFPS_LED_ON BIT(1) -#define CFFPS_LED_OFF BIT(2) +#define CFFPS_LED_BLINK (BIT(0) | BIT(6)) +#define CFFPS_LED_ON (BIT(1) | BIT(6)) +#define CFFPS_LED_OFF (BIT(2) | BIT(6)) #define CFFPS_BLINK_RATE_MS 250 enum { -- 2.30.2
