On Tue, 10 Jun 2014, Linus Walleij wrote: > There is a regression in the upcoming v3.16-rc1, that is caused > by a problem that has been around for a while but now finally > hangs the system. The bootcrawl looks like this: > > pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already > requested by a03e0000.usb_per5; cannot claim for musb-hdrc.0.auto > pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.0.auto) status -22 > pinctrl-nomadik soc:pinctrl: could not request pin 256 > (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik > musb-hdrc musb-hdrc.0.auto: Error applying setting, reverse > things back > HS USB OTG: no transceiver configured > musb-hdrc musb-hdrc.0.auto: musb_init_controller failed > with status -517 > platform musb-hdrc.0.auto: Driver musb-hdrc requests > probe deferral > (...) > > The ux500 MUSB driver propagates the OF node to the dynamically > created musb-hdrc device, which is incorrect as it makes the OF > core believe there are two devices spun from the very same > DT node, which confuses other parts of the device core, notably > the pin control subsystem, which will try to apply all the pin > control settings also to the HDRC device as it gets > instantiated. (The OMAP2430 for example, does not set the > of_node member.) > > Cc: stable@xxxxxxxxxxxxxxx > Cc: Lee Jones <lee.jones@xxxxxxxxxx> > Cc: Arnd Bergmann <arnd@xxxxxxxx> > Cc: Felipe Balbi <balbi@xxxxxx> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > drivers/usb/musb/ux500.c | 1 - > 1 file changed, 1 deletion(-) Looks good. Assuming it's fully tested: Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c > index c2e45e632723..f202e5088461 100644 > --- a/drivers/usb/musb/ux500.c > +++ b/drivers/usb/musb/ux500.c > @@ -274,7 +274,6 @@ static int ux500_probe(struct platform_device *pdev) > musb->dev.parent = &pdev->dev; > musb->dev.dma_mask = &pdev->dev.coherent_dma_mask; > musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; > - musb->dev.of_node = pdev->dev.of_node; > > glue->dev = &pdev->dev; > glue->musb = musb; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html