This is a note to let you know that I've just added the patch titled
usb: dwc3: core: balance phy init and exit
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 8cfac9a6744fcb143cb3e94ce002f09fd17fadbb Mon Sep 17 00:00:00 2001
From: Li Jun <jun.li@xxxxxxx>
Date: Wed, 8 Sep 2021 10:28:19 +0800
Subject: usb: dwc3: core: balance phy init and exit
After we start to do core soft reset while usb role switch,
the phy init is invoked at every switch to device mode, but
its counter part de-init is missing, this causes the actual
phy init can not be done when we really want to re-init phy
like system resume, because the counter maintained by phy
core is not 0. considering phy init is actually redundant for
role switch, so move out the phy init from core soft reset to
dwc3 core init where is the only place required.
Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode")
Cc: <stable@xxxxxxxxxxxxxxx>
Tested-by: faqiang.zhu <faqiang.zhu@xxxxxxx>
Tested-by: John Stultz <john.stultz@xxxxxxxxxx> #HiKey960
Acked-by: Felipe Balbi <balbi@xxxxxxxxxx>
Signed-off-by: Li Jun <jun.li@xxxxxxx>
Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 30 +++++++++++++-----------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 01866dcb953b..0104a80b185e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
int retries = 1000;
- int ret;
-
- usb_phy_init(dwc->usb2_phy);
- usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
- return ret;
-
- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0) {
- phy_exit(dwc->usb2_generic_phy);
- return ret;
- }
/*
* We're resetting only the device side because, if we're in host mode,
@@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
udelay(1);
} while (--retries);
- phy_exit(dwc->usb3_generic_phy);
- phy_exit(dwc->usb2_generic_phy);
-
return -ETIMEDOUT;
done:
@@ -982,9 +966,21 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc->phys_ready = true;
}
+ usb_phy_init(dwc->usb2_phy);
+ usb_phy_init(dwc->usb3_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+ if (ret < 0)
+ goto err0a;
+
+ ret = phy_init(dwc->usb3_generic_phy);
+ if (ret < 0) {
+ phy_exit(dwc->usb2_generic_phy);
+ goto err0a;
+ }
+
ret = dwc3_core_soft_reset(dwc);
if (ret)
- goto err0a;
+ goto err1;
if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
--
2.33.0
