From: Cezary Rojewski <cezary.rojewski@xxxxxxxxx>
[ Upstream commit 6d41bbf2fd3615c56dbf2b67f6cbf9e83d14a2e2 ]
Contrary to what is said in board's file, topology targeting
kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert
changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring
old behavior back, aligning with topology expectations.
Fixes: 716d53cc7837 ("ASoC: Intel: Boards: Add Maxim98373 support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@xxxxxxxxx>
Tested-by: Lukasz Majczak <lma@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@xxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +++-----------------
1 file changed, 7 insertions(+), 48 deletions(-)
diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c
index a31a7a7bbf66..2b43459adc33 100644
--- a/sound/soc/intel/boards/kbl_da7219_max98927.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98927.c
@@ -199,7 +199,7 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
}
if (!strcmp(codec_dai->component->name, MAX98373_DEV0_NAME)) {
ret = snd_soc_dai_set_tdm_slot(codec_dai,
- 0x03, 3, 8, 24);
+ 0x30, 3, 8, 16);
if (ret < 0) {
dev_err(runtime->dev,
"DEV0 TDM slot err:%d\n", ret);
@@ -208,10 +208,10 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
}
if (!strcmp(codec_dai->component->name, MAX98373_DEV1_NAME)) {
ret = snd_soc_dai_set_tdm_slot(codec_dai,
- 0x0C, 3, 8, 24);
+ 0xC0, 3, 8, 16);
if (ret < 0) {
dev_err(runtime->dev,
- "DEV0 TDM slot err:%d\n", ret);
+ "DEV1 TDM slot err:%d\n", ret);
return ret;
}
}
@@ -311,24 +311,6 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
* The above 2 loops are mutually exclusive based on the stream direction,
* thus rtd_dpcm variable will never be overwritten
*/
- /*
- * Topology for kblda7219m98373 & kblmax98373 supports only S24_LE,
- * where as kblda7219m98927 & kblmax98927 supports S16_LE by default.
- * Skipping the port wise FE and BE configuration for kblda7219m98373 &
- * kblmax98373 as the topology (FE & BE) supports S24_LE only.
- */
-
- if (!strcmp(rtd->card->name, "kblda7219m98373") ||
- !strcmp(rtd->card->name, "kblmax98373")) {
- /* The ADSP will convert the FE rate to 48k, stereo */
- rate->min = rate->max = 48000;
- chan->min = chan->max = DUAL_CHANNEL;
-
- /* set SSP to 24 bit */
- snd_mask_none(fmt);
- snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
- return 0;
- }
/*
* The ADSP will convert the FE rate to 48k, stereo, 24 bit
@@ -479,31 +461,20 @@ static struct snd_pcm_hw_constraint_list constraints_channels_quad = {
static int kbl_fe_startup(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *soc_rt = asoc_substream_to_rtd(substream);
/*
* On this platform for PCM device we support,
* 48Khz
* stereo
+ * 16 bit audio
*/
runtime->hw.channels_max = DUAL_CHANNEL;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
&constraints_channels);
- /*
- * Setup S24_LE (32 bit container and 24 bit valid data) for
- * kblda7219m98373 & kblmax98373. For kblda7219m98927 &
- * kblmax98927 keeping it as 16/16 due to topology FW dependency.
- */
- if (!strcmp(soc_rt->card->name, "kblda7219m98373") ||
- !strcmp(soc_rt->card->name, "kblmax98373")) {
- runtime->hw.formats = SNDRV_PCM_FMTBIT_S24_LE;
- snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
-
- } else {
- runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
- snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
- }
+
+ runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+ snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
@@ -536,23 +507,11 @@ static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd,
static int kabylake_dmic_startup(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *soc_rt = asoc_substream_to_rtd(substream);
runtime->hw.channels_min = runtime->hw.channels_max = QUAD_CHANNEL;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
&constraints_channels_quad);
- /*
- * Topology for kblda7219m98373 & kblmax98373 supports only S24_LE.
- * The DMIC also configured for S24_LE. Forcing the DMIC format to
- * S24_LE due to the topology FW dependency.
- */
- if (!strcmp(soc_rt->card->name, "kblda7219m98373") ||
- !strcmp(soc_rt->card->name, "kblmax98373")) {
- runtime->hw.formats = SNDRV_PCM_FMTBIT_S24_LE;
- snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
- }
-
return snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
}
--
2.30.2
