Support for firmware rev 508+ was added years ago, but we never noticed
it reports channel in a different way for G-PHY devices. Instead of
offset from 2400 MHz it simply passes channel id (AKA hw_value).
So far it was (most probably) affecting monitor mode users only, but
the following recent commit made it noticeable for quite everybody:
commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7
Author: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
Date: Tue Mar 4 16:50:13 2014 +0200
cfg80211/mac80211: ignore signal if the frame was heard on wrong channel
Reported-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Tested-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
drivers/net/wireless/b43/xmit.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 4f38f19..6e6ef3f 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -811,9 +811,13 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
break;
case B43_PHYTYPE_G:
status.band = IEEE80211_BAND_2GHZ;
- /* chanid is the radio channel cookie value as used
- * to tune the radio. */
- status.freq = chanid + 2400;
+ /* Somewhere between 478.104 and 508.1084 firmware for G-PHY
+ * has been modified to be compatible with N-PHY and others.
+ */
+ if (dev->fw.rev >= 508)
+ status.freq = ieee80211_channel_to_frequency(chanid, status.band);
+ else
+ status.freq = chanid + 2400;
break;
case B43_PHYTYPE_N:
case B43_PHYTYPE_LP:
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html