From: Quinn Tran <qutran@xxxxxxxxxxx> [ Upstream commit 7a8ff7d9854a1727435557184c8255bbbca60920 ] When Target port transitions personality from one to another (NVMe <--> FCP), there could be some overlap of the two where one layer is going down while the other layer is coming up. This overlap can cause temporary I/O error. Detect those errors/transitions and recover from them. Triggers session tear down and allow relogin to re-drive the connection under the following conditions: - NVMe command error - On PRLO + N2N (rida format 2) Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@xxxxxxxxxxx Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx> Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/qla2xxx/qla_attr.c | 12 +++++++----- drivers/scsi/qla2xxx/qla_isr.c | 9 +++++++++ drivers/scsi/qla2xxx/qla_mbx.c | 10 ++++++++++ 3 files changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 3aa9869f6fae..0708dbdfa2cc 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -2706,12 +2706,14 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) * final cleanup of firmware resources (PCBs and XCBs). */ if (fcport->loop_id != FC_NO_LOOP_ID) { - if (IS_FWI2_CAPABLE(fcport->vha->hw)) - fcport->vha->hw->isp_ops->fabric_logout(fcport->vha, - fcport->loop_id, fcport->d_id.b.domain, - fcport->d_id.b.area, fcport->d_id.b.al_pa); - else + if (IS_FWI2_CAPABLE(fcport->vha->hw)) { + if (fcport->loop_id != FC_NO_LOOP_ID) + fcport->logout_on_delete = 1; + + qlt_schedule_sess_for_deletion(fcport); + } else { qla2x00_port_logout(fcport->vha, fcport); + } } } diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index d9fb093a60a1..6d47f4a93eff 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2417,6 +2417,15 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, case CS_PORT_UNAVAILABLE: case CS_PORT_LOGGED_OUT: fcport->nvme_flag |= NVME_FLAG_RESETTING; + if (atomic_read(&fcport->state) == FCS_ONLINE) { + ql_dbg(ql_dbg_disc, fcport->vha, 0x3021, + "Port to be marked lost on fcport=%06x, current " + "port state= %s comp_status %x.\n", + fcport->d_id.b24, port_state_str[FCS_ONLINE], + comp_status); + + qlt_schedule_sess_for_deletion(fcport); + } fallthrough; case CS_ABORTED: case CS_PORT_BUSY: diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index f9992e010ed4..2c1b8d590162 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -4172,6 +4172,16 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, rptid_entry->u.f2.remote_nport_id[1]; fcport->d_id.b.al_pa = rptid_entry->u.f2.remote_nport_id[0]; + + /* + * For the case where remote port sending PRLO, FW + * sends up RIDA Format 2 as an indication of session + * loss. In other word, FW state change from PRLI + * complete back to PLOGI complete. Delete the + * session and let relogin drive the reconnect. + */ + if (atomic_read(&fcport->state) == FCS_ONLINE) + qlt_schedule_sess_for_deletion(fcport); } } } -- 2.30.2
