[PATCH AUTOSEL 5.14 48/99] platform/x86: intel_pmc_core: Prevent possibile overflow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>

[ Upstream commit 45b6f75eab6aabf9d88933830f41f532d39f38d2 ]

Substate priority levels are encoded in 4 bits in the LPM_PRI register.
This value was used as an index to an array whose element size was less
than 16, leading to the possibility of overflow should we read a larger
than expected priority.  In addition to the overflow, bad values could lead
to incorrect state reporting.  So rework the priority code to prevent the
overflow and perform some validation of the register. Use the priority
register values if they give an ordering of unique numbers between 0 and
the maximum number of states.  Otherwise, use a default ordering instead.

Reported-by: Evgeny Novikov <novikov@xxxxxxxxx>
Signed-off-by: David E. Box <david.e.box@xxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Link: https://lore.kernel.org/r/20210814014728.520856-1-david.e.box@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/platform/x86/intel_pmc_core.c | 65 +++++++++++++++++++++------
 drivers/platform/x86/intel_pmc_core.h |  2 +
 2 files changed, 53 insertions(+), 14 deletions(-)

diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index b0e486a6bdfb..ae410a358ffe 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -1449,9 +1449,42 @@ static int pmc_core_pkgc_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_pkgc);
 
-static void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev)
+static bool pmc_core_pri_verify(u32 lpm_pri, u8 *mode_order)
 {
-	u8 lpm_priority[LPM_MAX_NUM_MODES];
+	int i, j;
+
+	if (!lpm_pri)
+		return false;
+	/*
+	 * Each byte contains the priority level for 2 modes (7:4 and 3:0).
+	 * In a 32 bit register this allows for describing 8 modes. Store the
+	 * levels and look for values out of range.
+	 */
+	for (i = 0; i < 8; i++) {
+		int level = lpm_pri & GENMASK(3, 0);
+
+		if (level >= LPM_MAX_NUM_MODES)
+			return false;
+
+		mode_order[i] = level;
+		lpm_pri >>= 4;
+	}
+
+	/* Check that we have unique values */
+	for (i = 0; i < LPM_MAX_NUM_MODES - 1; i++)
+		for (j = i + 1; j < LPM_MAX_NUM_MODES; j++)
+			if (mode_order[i] == mode_order[j])
+				return false;
+
+	return true;
+}
+
+static void pmc_core_get_low_power_modes(struct platform_device *pdev)
+{
+	struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
+	u8 pri_order[LPM_MAX_NUM_MODES] = LPM_DEFAULT_PRI;
+	u8 mode_order[LPM_MAX_NUM_MODES];
+	u32 lpm_pri;
 	u32 lpm_en;
 	int mode, i, p;
 
@@ -1462,24 +1495,28 @@ static void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev)
 	lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset);
 	pmcdev->num_lpm_modes = hweight32(lpm_en);
 
-	/* Each byte contains information for 2 modes (7:4 and 3:0) */
-	for (mode = 0; mode < LPM_MAX_NUM_MODES; mode += 2) {
-		u8 priority = pmc_core_reg_read_byte(pmcdev,
-				pmcdev->map->lpm_priority_offset + (mode / 2));
-		int pri0 = GENMASK(3, 0) & priority;
-		int pri1 = (GENMASK(7, 4) & priority) >> 4;
+	/* Read 32 bit LPM_PRI register */
+	lpm_pri = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_priority_offset);
 
-		lpm_priority[pri0] = mode;
-		lpm_priority[pri1] = mode + 1;
-	}
 
 	/*
-	 * Loop though all modes from lowest to highest priority,
+	 * If lpm_pri value passes verification, then override the default
+	 * modes here. Otherwise stick with the default.
+	 */
+	if (pmc_core_pri_verify(lpm_pri, mode_order))
+		/* Get list of modes in priority order */
+		for (mode = 0; mode < LPM_MAX_NUM_MODES; mode++)
+			pri_order[mode_order[mode]] = mode;
+	else
+		dev_warn(&pdev->dev, "Assuming a default substate order for this platform\n");
+
+	/*
+	 * Loop through all modes from lowest to highest priority,
 	 * and capture all enabled modes in order
 	 */
 	i = 0;
 	for (p = LPM_MAX_NUM_MODES - 1; p >= 0; p--) {
-		int mode = lpm_priority[p];
+		int mode = pri_order[p];
 
 		if (!(BIT(mode) & lpm_en))
 			continue;
@@ -1675,7 +1712,7 @@ static int pmc_core_probe(struct platform_device *pdev)
 	mutex_init(&pmcdev->lock);
 
 	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(pmcdev);
-	pmc_core_get_low_power_modes(pmcdev);
+	pmc_core_get_low_power_modes(pdev);
 	pmc_core_do_dmi_quirks(pmcdev);
 
 	if (pmcdev->map == &tgl_reg_map)
diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
index e8dae9c6c45f..b9bf3d3d6f7a 100644
--- a/drivers/platform/x86/intel_pmc_core.h
+++ b/drivers/platform/x86/intel_pmc_core.h
@@ -188,6 +188,8 @@ enum ppfear_regs {
 #define ICL_PMC_SLP_S0_RES_COUNTER_STEP		0x64
 
 #define LPM_MAX_NUM_MODES			8
+#define LPM_DEFAULT_PRI				{ 7, 6, 2, 5, 4, 1, 3, 0 }
+
 #define GET_X2_COUNTER(v)			((v) >> 1)
 #define LPM_STS_LATCH_MODE			BIT(31)
 
-- 
2.30.2




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux