From: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
commit e7810c2d2c37fa8e58dda74b00790dab60fe6fba upstream.
This patch allows READ_CAPACITY + SAI_READ_CAPACITY_16 opcode
processing to occur while the associated ALUA group is in Standby
access state.
This is required to avoid host side LUN probe failures during the
initial scan if an ALUA group has already implicitly changed into
Standby access state.
This addresses a bug reported by Chris + Philip using dm-multipath
+ ESX hosts configured with ALUA multipath.
(Drop v3.15 specific set_ascq usage - nab)
Reported-by: Chris Boot <crb@xxxxxxxxxxxxxxxxxxxxx>
Reported-by: Philip Gaw <pgaw@xxxxxxxxxxxxxxx>
Cc: Chris Boot <crb@xxxxxxxxxxxxxxxxxxxxx>
Cc: Philip Gaw <pgaw@xxxxxxxxxxxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
---
drivers/target/target_core_alua.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index f608fbc..df58a67 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -409,7 +409,16 @@ static inline int core_alua_state_standby(
case REPORT_LUNS:
case RECEIVE_DIAGNOSTIC:
case SEND_DIAGNOSTIC:
+ case READ_CAPACITY:
return 0;
+ case SERVICE_ACTION_IN:
+ switch (cdb[1] & 0x1f) {
+ case SAI_READ_CAPACITY_16:
+ return 0;
+ default:
+ *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY;
+ return 1;
+ }
case MAINTENANCE_IN:
switch (cdb[1] & 0x1f) {
case MI_REPORT_TARGET_PGS:
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html