From: Rafał Miłecki <rafal@xxxxxxxxxx>
It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).
A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.
This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
drivers/net/dsa/b53/b53_common.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index bd1417a66cbf..dcf9d7e5ae14 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2612,9 +2612,8 @@ static int b53_switch_init(struct b53_device *dev)
dev->cpu_port = 5;
}
- /* cpu port is always last */
- dev->num_ports = dev->cpu_port + 1;
dev->enabled_ports |= BIT(dev->cpu_port);
+ dev->num_ports = fls(dev->enabled_ports);
/* Include non standard CPU port built-in PHYs to be probed */
if (is539x(dev) || is531x5(dev)) {
--
2.26.2
