3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Roger Quadros <rogerq@xxxxxx> commit 5005e0b76781c37d0a16dd6dd17d015098e8ce92 upstream. Commit c66d039197e4 broke NAND for non-DT boot on all OMAP2 and OMAP3 boards using board_nand_init(). Following error is seen at boot [ 0.154998] (null): Unsupported NAND ECC scheme selected For OMAP2 and OMAP3 platforms, the ecc_opt parameter in platform data must be set to OMAP_ECC_HAM1_CODE_HW to work properly. Tested on omap3-beagle c4. Fixes: c66d039197e4 (mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes) Signed-off-by: Roger Quadros <rogerq@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/board-flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partit board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html