From: Ben Hutchings <ben.hutchings@xxxxxxx>
[ Upstream commit 164844135a3f215d3018ee9d6875336beb942413 ]
Currently ksz8_port_vlan_filtering() sets or clears the VLAN Enable
hardware flag. That controls discarding of packets with a VID that
has not been enabled for any port on the switch.
Since it is a global flag, set the dsa_switch::vlan_filtering_is_global
flag so that the DSA core understands this can't be controlled per
port.
When VLAN filtering is enabled, the switch should also discard packets
with a VID that's not enabled on the ingress port. Set or clear each
external port's VLAN Ingress Filter flag in ksz8_port_vlan_filtering()
to make that happen.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <ben.hutchings@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/dsa/microchip/ksz8795.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 1e101ab56cea..108a14db1f1a 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -790,8 +790,14 @@ static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
if (switchdev_trans_ph_prepare(trans))
return 0;
+ /* Discard packets with VID not enabled on the switch */
ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+ /* Discard packets with VID not enabled on the ingress port */
+ for (port = 0; port < dev->phy_port_cnt; ++port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER,
+ flag);
+
return 0;
}
@@ -1266,6 +1272,11 @@ static int ksz8795_switch_init(struct ksz_device *dev)
/* set the real number of ports */
dev->ds->num_ports = dev->port_cnt + 1;
+ /* VLAN filtering is partly controlled by the global VLAN
+ * Enable flag
+ */
+ dev->ds->vlan_filtering_is_global = true;
+
return 0;
}
--
2.30.2
