On Sun, 8 Jun 2014 18:29:11 -0700 Yinghai Lu <yinghai@xxxxxxxxxx> wrote: > On Sun, Jun 8, 2014 at 3:14 PM, Luiz Capitulino <lcapitulino@xxxxxxxxxx> wrote: > > In short, I believe this is just dead code for the upstream kernel but this > > causes a bug for 2.6.32 based kernels. > > > > The setup_node_data() function is used to initialize NODE_DATA() for a node. > > It gets a node id and a memory range. The start address for the memory range > > is rounded up to ZONE_ALIGN and then it's used to initialize > > NODE_DATA(nid)->node_start_pfn. > > The 2.6.32 kernel did use the rounded up range start to register a node's > > memory range with the bootmem interface by calling init_bootmem_node(). > > A few steps later during bootmem initialization, the 2.6.32 kernel calls > > free_bootmem_with_active_regions() to initialize the bootmem bitmap. This > > function goes through all memory ranges read from the SRAT table and try > > to mark them as usable for bootmem usage. However, before marking a range > > as usable, mark_bootmem_node() asserts if the memory range start address > > (as read from the SRAT table) is less than the value registered with > > init_bootmem_node(). The assertion will trigger whenever the memory range > > start address is rounded up, as it will always be greater than what is > > reported in the SRAT table. This is true when the 2.6.32 kernel runs as a > > HyperV guest on Windows Server 2012. Dropping ZONE_ALIGN solves the > > problem there. > > What is e820 memmap and srat from HyperV guest? I think the dmesg below provides this? Let me know otherwise. > Can you post bootlog first 200 lines? [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.0-rc6+ (root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #113 SMP Thu May 29 16:28:41 CST 2014 [ 0.000000] Command line: ro root=/dev/mapper/vg_dhcp66106105-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_dhcp66106105/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_dhcp66106105/lv_root rd_NO_DM rhgb quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM console=ttyS0,115200 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000801fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 05/23/2012 [ 0.000000] Hypervisor detected: Microsoft HyperV [ 0.000000] HyperV: features 0xe7f, hints 0x2c [ 0.000000] HyperV: LAPIC Timer Frequency: 0x30d40 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x80200 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00000000000 mask 3FF00000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x020eb000, 0x020ebfff] PGTABLE [ 0.000000] BRK [0x020ec000, 0x020ecfff] PGTABLE [ 0.000000] BRK [0x020ed000, 0x020edfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x80000000-0x801fffff] [ 0.000000] [mem 0x80000000-0x801fffff] page 2M [ 0.000000] BRK [0x020ee000, 0x020eefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fffffff] [ 0.000000] [mem 0x7c000000-0x7fffffff] page 2M [ 0.000000] BRK [0x020ef000, 0x020effff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3ffeffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fdfffff] page 2M [ 0.000000] [mem 0x3fe00000-0x3ffeffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x40200000-0x7bffffff] [ 0.000000] [mem 0x40200000-0x7bffffff] page 2M [ 0.000000] RAMDISK: [mem 0x37a8c000-0x37feffff] [ 0.000000] ACPI: RSDP 0x00000000000F56F0 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000003FFF0000 000040 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000003FFF0200 000081 (v02 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000003FFF1724 002E78 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026) [ 0.000000] ACPI: FACS 0x000000003FFFF000 000040 [ 0.000000] ACPI: WAET 0x000000003FFF1480 000028 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: SLIC 0x000000003FFF14C0 000176 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: OEM0 0x000000003FFF16C0 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: SRAT 0x000000003FFF0600 0000C0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [ 0.000000] ACPI: APIC 0x000000003FFF0300 00024C (v01 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000003FFFF040 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff] [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x40200000-0x801fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fffffff] [ 0.000000] NODE_DATA [mem 0x3ffec000-0x3ffeffff] [ 0.000000] Initmem setup node 1 [mem 0x40800000-0x801fffff] [ 0.000000] NODE_DATA [mem 0x801fb000-0x801fefff] [ 0.000000] crashkernel: memory value expected [ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003ee00000-ffff88003fdfffff] on node 0 [ 0.000000] [ffffea0001000000-ffffea00021fffff] PMD -> [ffff88007e600000-ffff88007f7fffff] on node 1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3ffeffff] [ 0.000000] node 1: [mem 0x40200000-0x801fffff] [ 0.000000] On node 0 totalpages: 262030 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4032 pages used for memmap [ 0.000000] DMA32 zone: 258032 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 262144 [ 0.000000] DMA32 zone: 4096 pages used for memmap [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 64 CPUs, 60 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3fff0000-0x3fffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ffff000-0x3fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] e820: [mem 0x80200000-0xffffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003ea00000 s79616 r8192 d22784 u131072 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 04 06 08 10 12 14 16 18 20 22 24 26 28 30 [ 0.000000] pcpu-alloc: [0] 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 [ 0.000000] pcpu-alloc: [1] 02 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 [ 0.000000] pcpu-alloc: [1] 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 515961 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: ro root=/dev/mapper/vg_dhcp66106105-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_dhcp66106105/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_dhcp66106105/lv_root rd_NO_DM rhgb quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html