[PATCH] drm/i915: Avoid div-by-zero when pixel_multiplier is zero

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

On certain platforms pixel_multiplier is read out in
.get_pipe_config(), but it also gets used to calculate the
pixel clock in intel_sdvo_get_config(). If the pipe is disable
but some SDVO outputs are active, we may end up dividing by zero
in intel_sdvo_get_config().

To avoid the problem simply check for zero pixel_multiplier and skip
the division. Another attempt at fixing this involved populating
pixel_multiplier to 1 even for disabled pipes, but that triggered a
WARN because SDVO_CMD_GET_CLOCK_RATE_MULT command failed and thus
encoder_pixel_multiplier was left at zero and didn't match
pipe_config->pixel_multiplier.

The "divide by pixel_multiplier" operation got introduced here:
 commit 18442d08786472c63a0a80c27f92b033dffc26de
 Author: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
 Date:   Fri Sep 13 16:00:08 2013 +0300

    drm/i915: Fix port_clock and adjusted_mode.clock readout all over

and it has caused a regression on certain machines since they would
hit the div-by-zero during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76520
Cc: <stable@xxxxxxxxxxxxxxx> # 3.13+
Tested-by: Tim Richardson <tim@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 6a4d5bc..20375cc 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1385,7 +1385,9 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 			 >> SDVO_PORT_MULTIPLY_SHIFT) + 1;
 	}
 
-	dotclock = pipe_config->port_clock / pipe_config->pixel_multiplier;
+	dotclock = pipe_config->port_clock;
+	if (pipe_config->pixel_multiplier)
+		dotclock /= pipe_config->pixel_multiplier;
 
 	if (HAS_PCH_SPLIT(dev))
 		ironlake_check_encoder_dotclock(pipe_config, dotclock);
-- 
1.8.5.5

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]