[PATCH 5.10 165/167] drm/i915/gvt: Clear d3_entered on elsp cmd submission.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Colin Xu <colin.xu@xxxxxxxxx>

commit c90b4503ccf42d9d367e843c223df44aa550e82a upstream.

d3_entered flag is used to mark for vgpu_reset a previous power
transition from D3->D0, typically for VM resume from S3, so that gvt
could skip PPGTT invalidation in current vgpu_reset during resuming.

In case S0ix exit, although there is D3->D0, guest driver continue to
use vgpu as normal, with d3_entered set, until next shutdown/reboot or
power transition.

If a reboot follows a S0ix exit, device power state transite as:
D0->D3->D0->D0(reboot), while system power state transites as:
S0->S0 (reboot). There is no vgpu_reset until D0(reboot), thus
d3_entered won't be cleared, the vgpu_reset will skip PPGTT invalidation
however those PPGTT entries are no longer valid. Err appears like:

gvt: vgpu 2: vfio_pin_pages failed for gfn 0xxxxx, ret -22
gvt: vgpu 2: fail: spt xxxx guest entry 0xxxxx type 2
gvt: vgpu 2: fail: shadow page xxxx guest entry 0xxxxx type 2.

Give gvt a chance to clear d3_entered on elsp cmd submission so that the
states before & after S0ix enter/exit are consistent.

Fixes: ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.")
Reviewed-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Colin Xu <colin.xu@xxxxxxxxx>
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Link: http://patchwork.freedesktop.org/patch/msgid/20210707004531.4873-1-colin.xu@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/gvt/handlers.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -1728,6 +1728,21 @@ static int elsp_mmio_write(struct intel_
 	if (drm_WARN_ON(&i915->drm, !engine))
 		return -EINVAL;
 
+	/*
+	 * Due to d3_entered is used to indicate skipping PPGTT invalidation on
+	 * vGPU reset, it's set on D0->D3 on PCI config write, and cleared after
+	 * vGPU reset if in resuming.
+	 * In S0ix exit, the device power state also transite from D3 to D0 as
+	 * S3 resume, but no vGPU reset (triggered by QEMU devic model). After
+	 * S0ix exit, all engines continue to work. However the d3_entered
+	 * remains set which will break next vGPU reset logic (miss the expected
+	 * PPGTT invalidation).
+	 * Engines can only work in D0. Thus the 1st elsp write gives GVT a
+	 * chance to clear d3_entered.
+	 */
+	if (vgpu->d3_entered)
+		vgpu->d3_entered = false;
+
 	execlist = &vgpu->submission.execlist[engine->id];
 
 	execlist->elsp_dwords.data[3 - execlist->elsp_dwords.index] = data;





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux