From: Linus Walleij <linus.walleij@xxxxxxxxxx>
commit 9436abc40139503a7cea22a96437697d048f31c0 upstream
This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.
Cc: Peter Meerwald <pmeerw@xxxxxxxxxx>
Cc: Oleksandr Kravchenko <o.v.kravchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/accel/bma180.c | 68 +++++++++++++++++++++++++++++----------------
1 file changed, 44 insertions(+), 24 deletions(-)
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -626,32 +626,52 @@ static const struct iio_chan_spec bma250
static const struct bma180_part_info bma180_part_info[] = {
[BMA180] = {
- bma180_channels, ARRAY_SIZE(bma180_channels),
- bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
- bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
- BMA180_CTRL_REG0, BMA180_RESET_INT,
- BMA180_CTRL_REG0, BMA180_SLEEP,
- BMA180_BW_TCS, BMA180_BW,
- BMA180_OFFSET_LSB1, BMA180_RANGE,
- BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
- BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
- BMA180_RESET,
- bma180_chip_config,
- bma180_chip_disable,
+ .channels = bma180_channels,
+ .num_channels = ARRAY_SIZE(bma180_channels),
+ .scale_table = bma180_scale_table,
+ .num_scales = ARRAY_SIZE(bma180_scale_table),
+ .bw_table = bma180_bw_table,
+ .num_bw = ARRAY_SIZE(bma180_bw_table),
+ .int_reset_reg = BMA180_CTRL_REG0,
+ .int_reset_mask = BMA180_RESET_INT,
+ .sleep_reg = BMA180_CTRL_REG0,
+ .sleep_mask = BMA180_SLEEP,
+ .bw_reg = BMA180_BW_TCS,
+ .bw_mask = BMA180_BW,
+ .scale_reg = BMA180_OFFSET_LSB1,
+ .scale_mask = BMA180_RANGE,
+ .power_reg = BMA180_TCO_Z,
+ .power_mask = BMA180_MODE_CONFIG,
+ .lowpower_val = BMA180_LOW_POWER,
+ .int_enable_reg = BMA180_CTRL_REG3,
+ .int_enable_mask = BMA180_NEW_DATA_INT,
+ .softreset_reg = BMA180_RESET,
+ .chip_config = bma180_chip_config,
+ .chip_disable = bma180_chip_disable,
},
[BMA250] = {
- bma250_channels, ARRAY_SIZE(bma250_channels),
- bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
- bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
- BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
- BMA250_POWER_REG, BMA250_SUSPEND_MASK,
- BMA250_BW_REG, BMA250_BW_MASK,
- BMA250_RANGE_REG, BMA250_RANGE_MASK,
- BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
- BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
- BMA250_RESET_REG,
- bma250_chip_config,
- bma250_chip_disable,
+ .channels = bma250_channels,
+ .num_channels = ARRAY_SIZE(bma250_channels),
+ .scale_table = bma250_scale_table,
+ .num_scales = ARRAY_SIZE(bma250_scale_table),
+ .bw_table = bma250_bw_table,
+ .num_bw = ARRAY_SIZE(bma250_bw_table),
+ .int_reset_reg = BMA250_INT_RESET_REG,
+ .int_reset_mask = BMA250_INT_RESET_MASK,
+ .sleep_reg = BMA250_POWER_REG,
+ .sleep_mask = BMA250_SUSPEND_MASK,
+ .bw_reg = BMA250_BW_REG,
+ .bw_mask = BMA250_BW_MASK,
+ .scale_reg = BMA250_RANGE_REG,
+ .scale_mask = BMA250_RANGE_MASK,
+ .power_reg = BMA250_POWER_REG,
+ .power_mask = BMA250_LOWPOWER_MASK,
+ .lowpower_val = 1,
+ .int_enable_reg = BMA250_INT_ENABLE_REG,
+ .int_enable_mask = BMA250_DATA_INTEN_MASK,
+ .softreset_reg = BMA250_RESET_REG,
+ .chip_config = bma250_chip_config,
+ .chip_disable = bma250_chip_disable,
},
};
