From: Florian Fainelli <f.fainelli@xxxxxxxxx>
commit 2b452550a203d88112eaf0ba9fc4b750a000b496 upstream.
Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.
Tested-by: Maxime Ripard <maxime@xxxxxxxxxx>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3238,15 +3238,21 @@ static void bcmgenet_get_hw_addr(struct
/* Returns a reusable dma control register value */
static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
{
+ unsigned int i;
u32 reg;
u32 dma_ctrl;
/* disable DMA */
dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+ for (i = 0; i < priv->hw_params->tx_queues; i++)
+ dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
reg &= ~dma_ctrl;
bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
+ dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+ for (i = 0; i < priv->hw_params->rx_queues; i++)
+ dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
reg &= ~dma_ctrl;
bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
