On Mon, Jul 19, 2021 at 09:17:17PM +0530, Naresh Kamboju wrote:
> On Mon, 19 Jul 2021 at 21:01, Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> >
> > From: Petr Vorel <petr.vorel@xxxxxxxxx>
> >
> > [ Upstream commit f890f89d9a80fffbfa7ca791b78927e5b8aba869 ]
> >
> > Reserve GPIO pins 85-88 as these aren't meant to be accessible from the
> > application CPUs (causes reboot). Yet another fix similar to
> > 9134586715e3, 5f8d3ab136d0, which is needed to allow angler to boot after
> > 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning").
> >
> > Fixes: feeaf56ac78d ("arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support")
> >
> > Signed-off-by: Petr Vorel <petr.vorel@xxxxxxxxx>
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> > Link: https://lore.kernel.org/r/20210415193913.1836153-1-petr.vorel@xxxxxxxxx
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > index dfa08f513dc4..e5850c4d3334 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > @@ -38,3 +38,7 @@
> > };
> > };
> > };
> > +
> > +&tlmm {
> > + gpio-reserved-ranges = <85 4>;
> > +};
>
> Following build errors noticed on arm64 architecture on on
> stable-rc linux-4.19.y
> stable-rc linux-4.14.y
>
>
> make --silent --keep-going --jobs=8
> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm64
> CROSS_COMPILE=aarch64-linux-gnu- 'CC=sccache aarch64-linux-gnu-gcc'
> 'HOSTCC=sccache gcc'
> Error: /builds/linux/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts:42.1-6
> Label or path tlmm not found
> FATAL ERROR: Syntax error parsing input tree
> make[3]: *** [scripts/Makefile.lib:294:
> arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dtb] Error 1
> make[3]: Target '__build' not remade because of errors.
> make[2]: *** [/builds/linux/scripts/Makefile.build:544:
> arch/arm64/boot/dts/qcom] Error 2
>
> Reported-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>
>
> reference build link,
> build: https://builds.tuxbuild.com/1vXT4jBYUbNdKdLS1wz6gmXPVLM/
> config: https://builds.tuxbuild.com/1vXT4jBYUbNdKdLS1wz6gmXPVLM/config
>
>
> steps to reproduce:
> ---------------------
> # TuxMake is a command line tool and Python library that provides
> # portable and repeatable Linux kernel builds across a variety of
> # architectures, toolchains, kernel configurations, and make targets.
> #
> # TuxMake supports the concept of runtimes.
> # See https://docs.tuxmake.org/runtimes/, for that to work it requires
> # that you install podman or docker on your system.
> #
> # To install tuxmake on your system globally:
> # sudo pip3 install -U tuxmake
> #
> # See https://docs.tuxmake.org/ for complete documentation.
>
>
> tuxmake --runtime podman --target-arch arm64 --toolchain gcc-11
> --kconfig defconfig --kconfig-add
> https://builds.tuxbuild.com/1vXT4jBYUbNdKdLS1wz6gmXPVLM/config
>
Now dropped from everywhere, thanks.
greg k-h
