From: Salvatore Bonaccorso <carnil@xxxxxxxxxx> [ Upstream commit b19d3479f25e8a0ff24df0b46c82e50ef0f900dd ] Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the Orange Pi Plus board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Reported-by: "B.R. Oake" <broake@xxxxxxxxxxxxx> Reported-by: Vagrant Cascadian <vagrant@xxxxxxxxxxxxxxxxxxxxxxx> Link: https://bugs.debian.org/988574 Signed-off-by: Salvatore Bonaccorso <carnil@xxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210524122111.416885-1-carnil@xxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 97f497854e05..d05fa679dcd3 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -85,7 +85,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- 2.30.2