From: Stephan Gerhold <stephan@xxxxxxxxxxx>
[ Upstream commit f3076cd8d1d5fa64b5e1fa5affc045c2fc123baa ]
The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt
line. Therefore, it is not actually part of the RT5033 MFD and needs
its own of_match_table to probe properly.
Also, given that it's independent of the MFD, there is actually
no need to make the Kconfig depend on MFD_RT5033. Although the driver
uses the shared <linux/mfd/rt5033.h> header, there is no compile
or runtime dependency on the RT5033 MFD driver.
Cc: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/power/supply/Kconfig | 3 ++-
drivers/power/supply/rt5033_battery.c | 7 +++++++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 76c699b5abda..1d656aa2c6d6 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -621,7 +621,8 @@ config BATTERY_GOLDFISH
config BATTERY_RT5033
tristate "RT5033 fuel gauge support"
- depends on MFD_RT5033
+ depends on I2C
+ select REGMAP_I2C
help
This adds support for battery fuel gauge in Richtek RT5033 PMIC.
The fuelgauge calculates and determines the battery state of charge
diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
index bcdd83048492..9310b85f3405 100644
--- a/drivers/power/supply/rt5033_battery.c
+++ b/drivers/power/supply/rt5033_battery.c
@@ -167,9 +167,16 @@ static const struct i2c_device_id rt5033_battery_id[] = {
};
MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
+static const struct of_device_id rt5033_battery_of_match[] = {
+ { .compatible = "richtek,rt5033-battery", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rt5033_battery_of_match);
+
static struct i2c_driver rt5033_battery_driver = {
.driver = {
.name = "rt5033-battery",
+ .of_match_table = rt5033_battery_of_match,
},
.probe = rt5033_battery_probe,
.remove = rt5033_battery_remove,
--
2.30.2
