From: Marcel Apfelbaum <marcel.a@xxxxxxxxxx> This patch has been added to the 3.12 stable tree. If you have any objections, please let us know. =============== commit 93fa9d32670f5592c8e56abc9928fc194e1e72fc upstream. When a new device is added below a hotplug bridge, the bridge's secondary bus speed and the device's bus speed must match. The shpchp driver previously checked the bridge's *primary* bus speed, not the secondary bus speed. This caused hot-add errors like: shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch Check the secondary bus speed instead. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251 Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core") Signed-off-by: Marcel Apfelbaum <marcel.a@xxxxxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Acked-by: Michael S. Tsirkin <mst@xxxxxxxxxx> Signed-off-by: Jiri Slaby <jslaby@xxxxxxx> --- drivers/pci/hotplug/shpchp_ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 58499277903a..6efc2ec5e4db 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -282,8 +282,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - bsp = ctrl->pci_dev->bus->cur_bus_speed; - msp = ctrl->pci_dev->bus->max_bus_speed; + bsp = ctrl->pci_dev->subordinate->cur_bus_speed; + msp = ctrl->pci_dev->subordinate->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html