[PATCH 5.10 187/215] extcon: intel-mrfld: Sync hardware and software state on init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ferry Toth <ftoth@xxxxxxxxxxxxxx>

commit ecb5bdff901139850fb3ca3ae2d0cccac045bc52 upstream.

extcon driver for Basin Cove PMIC shadows the switch status used for dwc3
DRD to detect a change in the switch position. This change initializes the
status at probe time.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC")
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/extcon/extcon-intel-mrfld.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/extcon/extcon-intel-mrfld.c
+++ b/drivers/extcon/extcon-intel-mrfld.c
@@ -197,6 +197,7 @@ static int mrfld_extcon_probe(struct pla
 	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
 	struct regmap *regmap = pmic->regmap;
 	struct mrfld_extcon_data *data;
+	unsigned int status;
 	unsigned int id;
 	int irq, ret;
 
@@ -244,6 +245,14 @@ static int mrfld_extcon_probe(struct pla
 	/* Get initial state */
 	mrfld_extcon_role_detect(data);
 
+	/*
+	 * Cached status value is used for cable detection, see comments
+	 * in mrfld_extcon_cable_detect(), we need to sync cached value
+	 * with a real state of the hardware.
+	 */
+	regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+	data->status = status;
+
 	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
 	mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux